[1] Zhou V, Odum K, Soshi M, Yamazaki K. Development of a height control system using a dynamic powder splitter for directed energy deposition ( DED ) additive manufacturing. Progress in Additive Manufacturing 2022. https://doi.org/10.1007/s40964-022-00283-w.
[2] Odum K, Soshi M, Yamazaki K. Measurement and analysis of impact dynamics suitable for modelling pneumatic transport of metallic powder flow through a directed energy deposition nozzle. Advanced Powder Technology 2022;33:103515. https://doi.org/10.1016/j.apt.2022.103515.
[3] Odum K, Leung L, Soshi M, Yamazaki K. Improvement of Directed Energy Deposition material addition rate via fluence-based parameter scaling method. Progress in Additive Manufacturing 2021;1. https://doi.org/10.1007/s40964-021-00220-3.
[4] Li G, Odum K, Yau C, Soshi M, Yamazaki K. High productivity fluence based control of Directed Energy Deposition ( DED ) part geometry. Journal of Manufacturing Processes 2021;65:407–17. https://doi.org/10.1016/j.jmapro.2021.03.028.
[5] Zhang W, Soshi M, Yamazaki K. Development of an additive and subtractive hybrid manufacturing process planning strategy of planar surface for productivity and geometric accuracy. International Journal of Advanced Manufacturing Technology 2020;109:1479–91. https://doi.org/10.1007/s00170-020-05733-9.
[6] Dill J, Soshi M, Yamazaki K. A Study on the Effect of Directed Energy Deposition Substrate Energy on Clad Geometry. International Journal of Advanced Manufacturing Technology 2020;109:315–33. https://doi.org/10.1007/s00170-020-05485-6.
[7] Soshi M, Yau C, Kusama R. Development and Evaluation of a Dynamic Powder Splitting System for the Directed Energy Deposition ( DED ) Process. CIRP Annals Manufacturing Technology 2020;69:341–4. https://doi.org/10.1016/j.cirp.2020.04.048.
[8] Muhammad Ali Ablat, Ala Qattawi, Md Shah Jaman, Ala’aldin Alafaghani CY, Soshi M, Jian-Qiao Sun. An experimental and analytical model for force prediction in sheet metal forming process using perforated sheet and origami principles. Procedia Manufacturing, vol. 48, Elsevier B.V.; 2020, p. 407–18. https://doi.org/10.1016/j.procs.2019.09.104.
[9] Kidani S, Irino N, Maruyama S, Taniguchi K, Fujimori T, Soshi M, et al. Design and Analysis of a Built-in Yaw Measurement System Using Dual Linear Scales for Automatic Machine Tool Error Compensation. Journal of Manufacturing Processes 2020:0–1. https://doi.org/10.1016/j.jmapro.2020.04.023.
[10] Li W, Soshi M. Modeling Analysis of Grain Morphologies in Directed Energy Deposition (DED) Coating with Different Laser Scanning Patterns. Materials Letters 2019. https://doi.org/10.1016/j.matlet.2019.05.027.
[11] Soshi M, Odum K, Li G. Investigation of novel trochoidal toolpath strategies for productive and efficient directed energy deposition processes. CIRP Annals 2019. https://doi.org/10.1016/j.cirp.2019.04.112.
[12] Li W, Soshi M. Modeling analysis of the effect of laser transverse speed on grain morphology during directed energy deposition process. The International Journal of Advanced Manufacturing Technology 2019. https://doi.org/10.1007/s00170-019-03690-6.
[13] Soshi M, Rigolone F, Sheffield J, Yamazaki K. Development of a directly-driven thread whirling unit with advanced tool materials for mass-production of implantable medical parts. CIRP Annals 2018. https://doi.org/10.1016/j.cirp.2018.03.016.
[14] Pell DJ, Soshi M. Analysis and optimization of bone machining for robotic orthopedic surgeries. Int J Med Robotics Comput Assist Surg 2018. https://doi.org/10.1002/rcs.1910.
[15] Chang K, Soshi M. Optimization of Planar Honing Process for Surface Finish of Machine Tool Sliding Guideways. Journal of Manufacturing Science and Engineering 2017;139:071015. https://doi.org/10.1115/1.4036224.
[16] Soshi M, Ring J, Young C, Oda Y, Mori M. Innovative grid molding and cooling using an additive and subtractive hybrid CNC machine tool. CIRP Annals - Manufacturing Technology 2017:7–10. https://doi.org/10.1016/j.cirp.2017.04.093.
[17] Odum K, Raymond N, Pell D, Soshi M. Surface feature formation mechanism during finish milling of gray cast iron. The International Journal of Advanced Manufacturing Technology 2017. https://doi.org/10.1007/s00170-017-0162-z.
[18] Lei N, Soshi M. Vision-based system for chatter identification and process optimization in high-speed milling. The International Journal of Advanced Manufacturing Technology 2017;89:2757–69. https://doi.org/10.1007/s00170-016-9770-2.
[19] Raymond N, Soshi M. Sliding performance of machined grey cast iron surfaces after compliant abrasive surface polishing. The International Journal of Advanced Manufacturing Technology 2016. https://doi.org/10.1007/s00170-016-9668-z.
[20] Kianmajd B, Soshi M. A new Methodology of finding Optimal Toolpath and Tooling Strategies for Robotic Assisted Arthroplasty. Journal of Medical Devices 2016. https://doi.org/10.1115/1.4035129.
[21] Raymond N, Soshi M. Surface Polishing of Hardened Grey Cast Iron with a Compliant Abrasive Filament Tool. Procedia CIRP 2016;46:205–8. https://doi.org/10.1016/j.procir.2016.03.193.
[22] Odum K, Soshi M. Surface Formation Study Using a 3-D Explicit Finite Element Model of Machining of Gray Cast Iron. Procedia CIRP 2016;45:111–4. https://doi.org/http://dx.doi.org/10.1016/j.procir.2016.02.168.
[23] Raymond N, Soshi M. A Study on the Effect of Abrasive Filament Tool on Performance of Sliding Guideways for Machine Tools. Procedia CIRP 2016;45:223–6. https://doi.org/http://dx.doi.org/10.1016/j.procir.2016.02.169.
[24] Kianmajd B, Carter D, Soshi M. A novel toolpath force prediction algorithm using CAM volumetric data for optimizing robotic arthroplasty. International Journal of Computer Assisted Radiology and Surgery 2016:1–10. https://doi.org/10.1007/s11548-016-1355-x.
[25] Raymond N, Hill S, Soshi M. Characterization of surface polishing with spindle mounted abrasive disk-type filament tool for manufacturing of machine tool sliding guideways. The International Journal of Advanced Manufacturing Technology 2016:1–14. https://doi.org/10.1007/s00170-015-8283-8.
[26] Soshi M, Raymond N, Ishii S. Spindle Rotational Speed Effect on Milling Process at Low Cutting Speed. Procedia CIRP, vol. 14, Elsevier B.V.; 2014, p. 159–63. https://doi.org/10.1016/j.procir.2014.03.075.
[27] Soshi M. A Study on Friction and Wear Characteristics of Sliding Guideways Finished by CBN Milling and Conventional Grinding. Proceedings of NAMRI/SME 2013;41.
[28] Soshi M, Ueda E, Mori M. A study on friction and wear characteristics of sliding guideways finished by CBN milling and conventional grinding. Transactions of the North American Manufacturing Research Institution of SME, vol. 41, 2013.
[29] Soshi M, Ueda E, Mori M. A productive and cost-effective CBN hard milling-based fabrication method of hardened sliding guideways made of refined cast iron. The International Journal of Advanced Manufacturing Technology 2013;70:911–7. https://doi.org/10.1007/s00170-013-5343-9.
[30] Soshi M, Ishii S, Fonda P, Yamazaki K. High Performance Spindle Systems for Heavy Duty Milling of Difficult-To-Cut Aerospace Materials. SAE Int J Mater Manf 2012;6. https://doi.org/10.4271/2012-01-1877.
[31] Soshi M, Ishii S, Yamazaki K. A study on the effect of rotational dynamic characteristics of a machine tool spindle drive on milling processes. Procedia CIRP, vol. 1, 2012, p. 319–24.
[32] Soshi M, Fonda P, Kashihara M, Yonetani H, Yamazaki K. A study on cubic boron nitride (CBN) milling of hardened cast iron for productive and quality manufacturing of machine tool structural components. The International Journal of Advanced Manufacturing Technology 2012;65:1485–91. https://doi.org/10.1007/s00170-012-4272-3.
[33] Soshi M, Yu S, Ishii S, Yamazaki K. Development of a high torque-high power spindle system equipped with a synchronous motor for high performance cutting. CIRP Annals - Manufacturing Technology 2011;60:399–402.
[34] Wang Z, Soshi M, Yamazaki K. A comparative study on the spindle system equipped with synchronous and induction servo motors for heavy duty milling with highly stable torque control. CIRP Annals - Manufacturing Technology 2010;59:369–72.
[35] Soshi M, Ishiguro H, Yamazaki K. A study on the development of a multi-purpose spindle system for quality productive machining. CIRP Annals - Manufacturing Technology 2009;58:327–30.
[36] Liu X, Soshi M, Sahasrabudhe A, Yamazaki K, Mori M. A Geometrical Simulation System of Ball End Finish Milling Process and Its Application for the Prediction of Surface Micro Features. Journal of Manufacturing Science and Engineering 2006;128:74. https://doi.org/10.1115/1.2039098.
[37] Soshi M, Liu X, Yamazaki K, Mori M. Developement of a simulation system for surface topographic features in 5-axis CNC machining process. 7th International Conference on Progress of Machining Technology, 2004, p. 932–7.
[38] Akasawa T, Soshi M, Nakamura K, Tanaka T. Machinability of Oxygen-Free Pure Copper and Brass with Various Coated Tools. Journal of the IRICu 2003;42:243–7.
[39] Akasawa T, Nakamura M, Soshi M, Tanaka T. Machining Performance of Oxygen-free High Conductivity Copper and Brass with Various Tool Materials. 6th International Conference on Progress of Machining Technology, 2002, p. 24–9.